ZGPE（X）jawcrusher-Yantai Jinpeng Mining Machinery, ore dressing process & equipment, ore flotation & beneficiation

ZG-PE（X）jaw crusher

Jaw crusher works though the periodic movement of moving jaw by broken material usually used in coarse crushing stage has feature blew: High production capacity, Great breaking ratio, broken high efficiency.

Scope of Application:Ballast, mining, coal mining, dry powder mortar, concrete mixing station, power plant desulfurization, quartz sand, etc

Production capacity:1-192t/h

Max particle:80-630mm

 Mine Design Institute

Project :

Hundreds mining projects in more than 30 countries

Majors :

Geology,Shaft building,mining, Mining machine, Mineral processing, Smelting, Civil engineering, Electricity, General drawing, Water supply and drainage ,Tailing treatment, Heating and Ventilation,ect

LEAVE A MESSAGE

CHAT NOW

Structure
Principle
Parameters

Structure

Jaw crusher is composed of frame, rotating jaw, eccentric shaft, jaw plate and plate knee, etc. The motor drives the eccentric shaft through V-belt, making the movable jaw do periodic movement according to the well timed track. The material is crushed in this process. The frame adopts whole cast steel structure or welding steel plate. Guard plates are installed on the left and right side of the frame, preventing the side frame wearing. Rotating jaw adopts moulding cast steel, which has movable jaw plate at front, the above part hang on the frame by the eccentric shaft and rotating shaft, the under part bear on the plate. Belt pulley with fly wheel and trough are installed at both side of eccentric shaft. The other side of plate knee bear on the adjust base. The plate supports the movable jaw, also it can cut off itself for safety when the load is increased, protecting the other part of the components. One spare plate is with the machine, which is used at the discharging opening. Adjust base is installed in the side trough of the frame, close to the adjust block. When the discharging opening need adjust, turn right of the screw nut with the spanner. Adjust base rise, the discharging opening becomes Small, otherwise, small instead.

图片.png

Two forms : a)Simple swinging type b)complicated swinging type

图片.png

Principle

The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves. So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet

Working Principle of Jaw Crusher:

破碎机工作原理2.gif 颚式破碎机原理.gif

Characteristics of Jaw Crusher:

-High ratio of crushing,

-Even final size, -Simple structure,

-Reliable working condition,

-Easy maintenance,

-Low operating cost

Parameters

Model	Input Measure(mm)	Output Adjustment Range(mm)	Max particle（mm）	production capacity(T/h)	Eccentric wheel speed(r/min)	Dynamo power(KW)	Boundary dimension (mm)	Weight(kg)
PE-100×150	100×150	5-20	80	0.5-2	300	2.2	525×535×605	230
PE-150×250	150×250	10-40	125	2-6	300	5.5	875×745×935	1100
PE-200×350	200×350	10-50	160	6-10	300	7.5	1080×1060×1088	1600
PE-250×400	250×400	20-60	210	8-16	300	15	1108×1090×1392	1850
PE-250×500	250×500	20-80	210	13-21	300	18.5	1360×1450×1440	3100
PE-400×600	400×600	40-100	350	14-36	275	30	1650×1748×1520	5800
PE-500×750	500×750	50-120	400	30-80	250	45	1900×1876×1821	9000
PE-600×900	600×900	75-200	480	56-192	250	55-75	2280×2245×2320	18700
PEX-150×750	150×750	10-40	120	8-25	320	15	1210×1572×1045	2800
PEX-200×1000	200×1000	15-40	160	12-50	330	22	1860×1385×1200	5200
PEXS-250×750	250×750	20-60	210	10-745	320	22	1520×1728×1380	5000
PEX-250×1000	250×1000	20-50	210	15-50	330	30	1550×1990×1370	6500
PEXS-250×1200	250×1200	20-60	210	20-70	320	45	1530×2285×1625	9000
ZG-PE-250×400	250×400	20-60	200	8-16	300	15	1430×1316×1296	2800
ZG-PE-250×500	250×500	20-80	210	13-21	285	18.5	1425×1420×1417	3300
ZG-PE-400×600	400×600	40-100	350	14-36	275	30	1700×1732×1656	6500
ZG-PE-600×900	600×900	75-200	460	56-192	250	55	2240×2150×2400	15400
ZG-PEX-150×750	150×750	10-40	120	8-25	320	15	1210×1572×1045	3500
ZG-PEX-250×750	250×750	20-60	210	10-45	320	22	1751×1400×1515	4900
ZG-PEX-250×1000	250×1000	20-50	210	15-50	330	30	1550×1990×1370	6800
ZG-PEX-250×1200	250×1200	20-60	210	20-70	320	45	1670×2190×1430	9000
PE-750×1060	750×1060	100-200&

Browse other product

You can share this to your friends

Please leave a message and we'll get back to you.

Send